BenQ W1050 User Manual page 13

Remote control
1
2
3
4
5
6
7
8
9
10
1. ON
Turns on the projector. See
the projector" on page 22
2. Keystone
Turns on or off Keystone menu. See
"Correcting keystone" on page 29
details.
3. Up/ Down/
When the On-Screen Display (OSD)
menu is activated, the keys are used as
directional arrows to select the desired
menu items and to make adjustments.
See "Using the menus" on page 25
details.
4. BACK
Goes back to previous OSD menu or
exits and saves menu settings when it is
on the top level of OSD menu.
5. PIC MODE
Selects an available picture setup mode.
See "Selecting a picture mode" on page
33 for details.
11
3
12
3
13
14
3
15
16
17
18
19
20
21
22
23
"Starting up
for details.
for
Left/ Right
for
6. BRIGHT BOOST
BRIGHT BOOST is not supported
by this model.
7. 3D
Activates the 3D On-Screen Display
(OSD) menu item.
8. BRIGHT
Displays Bright mode menu.
9. COLOR TEMP
Displays the color temperature setting
bar.
10. GAMMA
Selects a gamma value.
11. OFF
Turns off the projector. See
down the projector" on page 42
details.
12. SOURCE
Displays the source selection bar. See
"Switching input signal" on page 30
details.
13. OK
Activates the selected On-Screen
Display (OSD) menu item. See
the menus" on page 25
14. MENU
Turns on the On-Screen Display
(OSD) menu, exits and saves menu
settings. See "Using the menus" on page
25 for details.
15. Volume keys (VOL
Adjusts the sound level.
16. INVERT
Inverts right/left eye picture when 3D
mode is activated.
17. Mute
Toggles projector audio between on
and off.
"Shutting
for
for
"Using
for details.
/ )
Introduction 13