Description of each menu
•
The default values listed in this manual, especially on pages 48-57, are for
reference only. They may vary between the projectors due to the continuous
improvement to the products.
FUNCTION
Wall Color
Projector
Position
Test Patternn
Auto Source
Search
Menu Type
HDMI Range
Reset Lamp
Timer
Operation
48
DESCRIPTION
Corrects the projected picture's color when the projection
surface is not white. See
details.
The projector can be installed on a ceiling or behind a screen, or
with one or more mirrors. See
for details.
Selecting On enables the function and the projector displays the
grid test pattern. It helps you adjust the image size and focus and
check that the projected image is free from distortion.
See
"Switching input signal" on page 30
Selects a Basic or Advanced menu type.
Selects an input source type for the HDMI signal.
Auto
Enables the auto selection of HDMI format.
Full
Selects RGB full range for PC signal.
Limited
Selects RGB limited range for video signal.
See
"Resetting the lamp timer" on page 66
"Using Wall Color" on page 34
"Choosing a location" on page 15
for details.
for details.
for