BenQ W1050 User Manual page 14

18. CONTRAST
Displays the contrast setting bar.
19. AUTO
Automatically determines the best
picture timings for the displayed
image. See "Auto-adjusting the image"
on page 23 for details.
20. LIGHT MODE
Displays the lamp power mode
selection bar (Normal/Economic/
SmartEco).
Infra-Red (IR) remote control sensor is located on the front of the projector. The
remote control must be held at an angle within 30 degrees perpendicular to the
projector's IR remote control sensor to function correctly. The distance between the
remote control and the sensor should not exceed 8 meters (~ 26 feet).
Make sure that there are no obstacles between the remote control and the IR sensor
on the projector that might obstruct the infra-red beam.
14 Introduction
21. COLOR MANAGE
22. ECO BLANK
23. SHARP
• Operating the projector from
the front
Displays the color management setting
bar.
Press the ECO BLANK button to turn
off the image for a period of time with
70% lamp power saving. Press again to
restore the image. See
image" on page 39
Displays the sharpness setting bar.
"Hiding the
for details.