Care And Maintenance - Vinotemp VT-WINEDISP2 Owner's Manual

2 bottle wine dispenser and preserver.

Hide thumbs Also See for VT-WINEDISP2:

Table of Contents

Setting the Temperature

The temperature display will show the current temperature inside the unit. To set a temperature,

press and hold the

flash. Once the temperature display starts to flash, use the

desired temperature.

For wine to stay fresh up to 45 days, bottles must be closed and unit preservation system must

be properly sealed to prevent deterioration. Keep wine at proper temperature in unit.

LED Light

The LED light can be switched on or off by pressing the

IMPORTANT: Always unplug your wine dispenser before cleaning or performing maintenance.

Never use harsh cleansers or scouring pads to clean any part of the wine dispenser.

Cleaning

To clean the stopper dispenser and solenoid valve:

1. Fill a bottle with clean warm water and place the stopper-dispenser onto the bottle.

2. Press and hold the

3. To start the automatic cleaning setting, press the portion

until the display begins to flash and shows "CL".

4. Continue to dispense and flush the system until dry argon comes from the spout.

button till the display shows "H1" and the displayed temperature starts to

CARE AND MAINTENANCE

button to begin dispensing the warm water.

W W W . V I N O T E M P . C O M

buttons to select your

button.

button 5 times and then hold

Table of Contents