Care & Maintenance - Vinotemp VT-WINED RAW4 Owner's Manual

Removing Condensation
1. Remove the extra condensate if
it is accumulated in the wine
cellar at high temperature and
humidity conditions.
2. Unscrew the two tray screws to
empty the drip tray periodically
to remove the extra
condensation.
Replacing Stopper-Dispenser
NOTE:
• ALL PIPE THREAD CONNECTIONS REQUIRE TEFLON SEALANT.
1. Hold the Stopper-Dispenser and press the spring at the quick-disconnect
coupling socket to unplug the coupling plug.
2. Hold the Stopper-Dispenser and turn the thumbwheel counter-clockwise
all the way to loosen
3. Loosen and remove the compression fitting.
4. Loosen and remove coupling socket.
5. Loosen and remove female 90
6. Loosen and remove inline filter.
7. Replace the used stopper-dispenser with a new one.
8. Use the reverse steps to install the new stopper-dispenser.
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
CARE & MAINTENANCE
the empty bottle.
elbow.
°
i n f o @ v i n o t e m p . c o m
13