Related Manuals for Crown CT10153
Summary of Contents for Crown CT10153
- Page 1 CT10153 en Original instructions Merit Link International AG P.O. Box 641, CH-6855 Stabio ru Оригинальное руководство по эксплуатации Switzerland www.meritlink.com Notice originale...
-
Page 2: General Safety Instructions
SAFETY GENERAL SAFETY INSTRUCTIONS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool. - Page 3 > Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. > Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool.
-
Page 4: Technical Specifications
This will ensure that the safety of the power tool is maintained. > If the replacement of the s upply cord is necessary, this has to be done by the manufacturer or his agent in order to avoid a safety hazard. TECHNICAL SPECIFICATIONS Model Number CT10153 Voltage 230-240V~,50Hz Power 1600W... -
Page 5: Production Description
1. MAIN COMPONETS SINGLE MIXING TOOL 1) Mix tool 2) M16 tool connection shaft 3) Electronic speed regulator 4) I II Speed switching Poker Rod 5) Start Switch 6) Motor Housing 2. PRODUCTION DESCRIPTION The mixer is an electrical power mixer, which fitted with double count-rotating mixing tool (single mixing tools also available). - Page 6 4) DO avoid the machine affected with damp when the machine operated in the amp working space! 5) DO keep the working space sufficient lighting! 6) DO check the power source / voltage is same as showed on the machine label's! 7) DO check the machine have earth protecting or not! 8) The machine CANNOT be over loading! 9) The electrical cable CANNOT be too far away the machine, CANNOT pull the cable...
-
Page 7: Operation
4. OPERATION (1) DOUBLE MIXING Push down the chuck by hand (picture 1); Connect the paddle into the spline shaft directly (picture 2); And then loose your hand (picture 3). (picture 1) (picture 2) (picture 3) START MACHINE Push down the switch rest-lock knob first and then push down the start switch; Mechanical speed regulator operation instruction: (picuture 4) a) When the machine is under STOP condition, please turn the Knob switch to change the speed;... -
Page 8: Maintenance
(picture 6) 5. MAINTENANCE Correct maintenance for the machine can prolong the working life; The handle switch must always keep in proper function and good maintenance; The mixing tools should be cleaned when the operation is finish or no use for long time;...