LevelOne WBR-2401 User Manual page 10

Figure 2-3 Setup of LAN and WAN connections for this product.
3. Setup ADSL connection
Prepare an telephone cable for connecting this product to your ISP. Figure 2-3 illustrates the ADSL
connection.
4. Connecting this product with your printer (optional)
Use the printer cable to connect your printer to the printer port of this product. (Optional)
5. Power on
Connecting the power cord to power inlet and turning the power switch on, this product will
automatically enter the self-test phase. When it is in the self-test phase, the indicators M1 will be
lighted ON for about 10 seconds, and then M1 will be flashed 3 times to indicate that the self-test
operation has finished. Finally, the M1 will be continuously flashed once per second to indicate that
this product is in normal operation.
10