Long-term storage
See "Storing the machine"
MS 441 C-M
Oil Quantity Control
Varying cutting lengths, types of wood
and working techniques require varying
quantities of oil.
Standard oil pump
1
The oil delivery rate can be adjusted as
needed using the adjusting screw (1)
(on the bottom of the machine).
Ematic setting (E), moderate oil delivery
rate –
Turn adjusting screw to "E" (Ematic
N
setting)
Increase oil delivery rate –
Turn the adjusting screw clockwise
N
Reduce oil delivery rate –
Turn the adjusting screw
N
counterclockwise
NOTICE
The saw chain must always be coated
with chain oil.
Oil pump with increased delivery rate
(available option)
The oil pump with increased delivery
rate can be identified by the groove (2)
in the adjusting screw.
With this oil pump, in setting range a, the
oil tank can run empty before the fuel
tank, thus causing the saw chain to run
dry.
in setting range a, fill the fuel tank
N
only half full or refill the oil tank
when the fuel tank is approximately
half empty
English
41