Change The Dynamic Dns Settings; Set Up Your Personal Ftp Server; Remotely Access A Usb Device Using Readycloud - NETGEAR R6400v2 User Manual

Change the Dynamic DNS Settings

To change your settings:

1. Launch an Internet browser from a computer or mobile device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Settings > Dynamic DNS.
The Dynamic DNS page displays.
5. Change your DDNS account settings as necessary.
6. Click the Apply button.
Your changes are saved.

Set Up Your Personal FTP Server

To set up your personal account and use FTP:

1. Get your free NETGEAR Dynamic DNS domain name.
See Your Personal FTP Server
2. Make sure that your Internet connection is working.
Your router must use a direct Internet connection. It cannot connect to a different router to
access the Internet.
3. Connect a USB hard disk drive to a USB port on the router.
4. Set up FTP access in the router.
See Set Up FTP Access Through the Internet
On a remote computer with Internet access, you can use FTP to access your router using
ftp://yourname.mynetgear.com.
5. On your WAN PC, you can FTP to your router using ftp://yourname.mynetgear.com.

Remotely Access a USB Device Using ReadyCLOUD

NETGEAR ReadyCLOUD for routers lets you remotely access files stored on a USB storage
device that is connected to the router. Before you can use ReadyCLOUD, you must create a
ReadyCLOUD account and register your router.
AC1750 Smart WiFi Router
on page 85.
Access the Router's USB Drive Through the Internet
89
on page 83.