Erase The Current Configuration Settings; Remote Management - NETGEAR R6400v2 User Manual

6. Click the Restore button.
The file is uploaded to the router and the router reboots.
WARNING:
Do not interrupt the reboot process.

Erase the Current Configuration Settings

You can erase the current configuration and restore the factory default settings. You might
want to do this if you move the router to a different network. (See
page 176).
To erase the configuration settings:

1. Launch an Internet browser from a computer or mobile device that is connected to the
network.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Backup Settings.
The Backup Settings page displays.
5. Click the Erase button.
The factory default settings are restored. The user name is admin, the password is
password, and the LAN IP address is 192.168.1.1. DHCP is enabled.

Remote Management

You can access your router over the Internet to view or change its settings. You must know
the router's WAN IP address to use this feature. For information about remote access using
Dynamic DNS, see
Note: Be sure to change the password for the user name admin to a secure
password. The ideal password contains no dictionary words from any
language and contains uppercase and lowercase letters, numbers,
and symbols. It can be up to 30 characters. See
Password
AC1750 Smart WiFi Router
Chapter 7, Access the Router's USB Drive Through the
on page 131.
Manage Your Network
Change the admin
144
Factory Settings on
Internet.