Table of Contents
Advertisement
2.
Type http://www.routerlogin.net or http://www.routerlogin.com.
A login window opens.
3.
Enter the router user name and password.
The user name is admin. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > WPS Wizard.
A page displays information about WPS.
5.
Click the Next button.
6.
Select the radio button for a setup method:.
•
Push button. Click the WPS button on this page.
•
PIN Number. The page adjusts. Enter the client security PIN, and click the Next
button.
7.
Within two minutes, go to the client device and use its WPS software to connect to the WiFi
network.
The WPS process automatically sets up your wireless computer with the network
password when it connects. The router WPS page displays a confirmation message.
Specify Basic WiFi Settings
The router comes with preset security. This means that the WiFi network name (SSID),
network key (password), and security option (encryption protocol) are preset in the factory.
You can find the preset SSID and password on the router label.
Note:
The preset SSID and password are uniquely generated for every
device to protect and maximize your wireless security.
NETGEAR recommends that you do not change your preset security
your preset security settings, make a note of the new settings and store it in a safe place
where you can easily find it.
If you use a wireless computer to change the SSID or other wireless security settings, you
are disconnected when you click the Apply button. To avoid this problem, use a computer
with a wired connection to access the router.
To specify basic wireless settings:
1.
Launch an Internet browser from a computer or mobile device that is connected to the
network.
2.
Type http://www.routerlogin.net or http://www.routerlogin.com.
A login window opens.
AC1750 Smart WiFi Router
Specify Network Settings
115
settings.
If you change
Hide quick links:
Advertisement
Table of Contents
