Table of Contents
Advertisement
Your settings are saved.
12.
Click the Test button to test your Internet connection.
If the NETGEAR website does not display within one minute, see
Troubleshooting.
Specify an Internet Connection That Uses a Login
To view or change the basic Internet setup:
1.
Launch an Internet browser from a computer or mobile device that is connected to the
network.
2.
Type http://www.routerlogin.net or http://www.routerlogin.com.
A login window opens.
3.
Enter the router user name and password.
The user name is admin. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select Internet.
The Internet Setup page displays.
5.
For the Does your Internet connection require a login setting, select the Yes radio button.
The page adjusts.
6.
In the Internet Service Provider menu, select the encapsulation method PPPoE, PPTP, or
L2TP.
7.
In the Login field, enter the login name your ISP gave you.
This login name is often an email address.
8.
In the Password field, type the password that you use to log in to your Internet service.
9.
If your ISP requires a service name, type it in the Service Name (if Required) field.
10.
In the Connection Mode menu, select Always On, Dial on Demand, or Manually
Connect.
11.
To change the number of minutes until the Internet login time-out, in the Idle Timeout (In
minutes) field, type the number of minutes.
This is how long the router keeps the Internet connection active when no one on the
network is using the Internet connection. A value of 0 (zero) means never log out.
12.
Select an Internet IP Address radio button:
•
Get Dynamically from ISP. Your ISP uses DHCP to assign your IP address. Your ISP
automatically assigns these addresses.
•
Use Static IP Address. Enter the IP address, IP subnet mask, and the gateway IP
address that your ISP assigned. The gateway is the ISP router to which your router
connects.
AC1750 Smart WiFi Router
Specify Your Internet Settings
24
Chapter 14,
Hide quick links:
Advertisement
Table of Contents
