Table of Contents
Advertisement
To set up remote management:
1.
Launch an Internet browser from a computer or mobile device that is connected to the
network.
2.
Type http://www.routerlogin.net or http://www.routerlogin.com.
A login window opens.
3.
Enter the router user name and password.
The user name is admin. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > Remote Management.
5.
Select the Turn Remote Management On check box.
6.
In the Allow Remote Access By section, specify the external IP addresses to be allowed to
access the router's remote management.
Note:
For enhanced security, restrict access to as few external IP addresses
as practical
Select one of the following:
•
To allow access from a single IP address on the Internet, select the Only This
Computer radio button. Enter the IP address to be allowed access.
•
To allow access from a range of IP addresses on the Internet, select the IP Address
Range radio button. Enter a beginning and ending IP address to define the allowed
range.
•
To allow access from any IP address on the Internet, select the Everyone radio
button.
7.
Specify the port number for accessing the web management interface.
Normal web browser access uses the standard HTTP service port 80. For greater
security, enter a custom port number for the remote web management interface. Choose
a number from 1024 to 65535, but do not use the number of any common service port.
The default is 8080, which is a common alternate for HTTP.
AC1750 Smart WiFi Router
Manage Your Network
145
Hide quick links:
Advertisement
Table of Contents
