Table of Contents
Advertisement
5. Under User Name, enter user.
6. Under Password, enter user, or your own password, if you have created
one. You can create or change a password after you log on.
7. Click Log In. The WebUI appears.
Click topics from the navigation bar at the top of the page, and then click the
desired setting on the left side of the WebUI to see the page for that setting. You
view and change settings in two different types of fields: drop-down lists and
entry fields into which you type information. For your security, the WebUI times
out after 10 minutes, so if it is idle for that time, you must log on again.
The remaining procedures in this section assume that you have already logged
on to the WebUI.
Status
The Status page shows:
•
General information about your phone, including model, MAC address, and
firmware version.
•
Account Status information about your SIP account registration.
•
Network information regarding your phone's network address and network
connection.
The Status page has no settings that you can change. You may need some of
the status information for troubleshooting purposes.
57
Advertisement
Table of Contents
