VTech Eris Terminal VSP715A User Manual page 23

Using the Phone
Making calls (continued)
To make a call by pre-dialing:
1. Use the key pad to enter the desired phone number.
• Press
Backspc
• Press
need to enter a domain name as part of the number).
2. Dial the number by:
• Pressing
(speaker or headset) until you lift the handset.
• Lifting the handset.
• Pressing the desired Line key.
Pressing SPEAKER or HEADSET.
•
When the call is answered, the active call screen appears.
To end the call, hang up or press
handset is "on hook," press SPEAKER to end your call.
Note that the default active call screen soft keys are shown above. Your phone's
soft keys are programmable and may differ from what is shown here.
To make a call using quick dial:
• Press the desired quick dial programmable key.
–or–
Press and hold a dial pad key that matches the number of the desired speed
dial entry. For example, to dial speed dial entry 4, press and hold 4 on the
dial pad. See "Speed Dial" on page 48.
if you enter an incorrect digit.
to change from entering digits to entering letters (if you
123
. The phone will use the preferred audio mode
Dial
. If you are on speakerphone and the
End
23