Main Menu Items; Making Calls - VTech Eris Terminal VSP715A User Manual

Using the Phone

Main menu items

1. Features (see page 37)
2. Status (see page 49)

Making calls

You can make a call at any time by choosing an off-hook method (such as lifting
the handset, pressing a Line key, or pressing HEADSET or SPEAKER), and then
dialing a number. When the phone is in idle mode or has calls on hold, you can
make a call by pre-dialing a phone number and then going off hook to call the
number.
To go off hook and make a call:
1. To use the default line, lift the handset, press HEADSET, or press
SPEAKER. You hear a dial tone.
Note: You may be able to select a specific line by pressing one of the
programmable keys, depending on how your phone is configured.
2. Use the key pad to enter the desired phone number.
• Press
Backspc
• Press
need to enter a domain name as part of the number).
3. Press
Dial
number after a short delay.
Note that the default live dial soft keys are shown above. Your phone's soft keys
are programmable and may differ from what is shown here.
If Hotline is enabled, then the phone will automatically dial a pre-programmed
number after going off hook.
if you enter an incorrect digit.
to change from entering digits to entering letters (if you
123
, or, if the phone accepts the number as valid, it dials the
3. User settings (see page 50)
4. Admin settings (available
only to your system administrator)
22