Tech And Jbl Ver Tec - Crown I-Tech I-T6000 Application Manual

Crown i-tech i-t6000: user guide
Hide thumbs Also See for I-Tech I-T6000:
Table of Contents

Advertisement

Section 4: I-Tech and JBL VerTec
4 I-Tech and JBL V
Crown I-Tech amplifi ers and JBL V
powerful combination. With them, you can deliver a sound that is very loud, clear, and
natural, with uniform controlled coverage. This section provides recommendations for
matching I-Tech amplifi ers to V
The examples shown are basic building blocks of a complement of V
along with the appropriate I-Tech amplifi ers to drive them. You can design your system
with these suggestions used in multiples to build the size of line array you need for
your application. With I-Tech's studio-grade, on-board DSP and factory furnished
speaker-modeling presets designed for V
easier.
When choosing your power amplifi er confi guration, you may want to use identical
amplifi ers for all frequency bands in the system. This is perfectly permissible if you
use the available signal processing to limit each amp's channel to a safe output level
for its bandpass. This may make it easier to reconfi gure your amplifi er inventory as
needed.
The limiter settings provided for the example systems are based on Average Power
and Continuous Maximum Power specifi cations as suggested by JBL for V
Array systems. The band-pass peak voltage is 6 dB above the voltage used at continu-
ous maximum power. The recommended limiter threshold settings will provide 3 dB of
headroom before the band-pass peak voltage is reached. The limiter would engage 3
dB above continuous average power, or 3 dB below the peak voltage for the component
or Bandpass. Users should adjust these values to their particular needs.
To take full advantage of the Line Array Summation Effect, and to maintain good array
coverage and directionality, we suggest using a minimum of four V
ments. Subwoofers are optional and may not be required in many situations. Refer to
the JBL V
T
Application Guide for further information.
ER
EC
T
ER
EC
T
Line Array loudspeaker systems make a
ER
EC
T
loudspeakers, and how to properly wire them.
ER
EC
T
, setting up your system has never been
ER
EC
Application Guide
15
T
elements,
ER
EC
T
Line
ER
EC
T
array ele-
ER
EC

Advertisement

Table of Contents
loading

This manual is also suitable for:

I-t4000I-tech seriesI-t8000

Table of Contents