Presets; Save Settings As A Preset; Recall A Preset - Crown I-Tech I-T6000 Application Manual

12

3.4 Presets

3.4.1 Save Settings as a Preset

If you wish, you can store the settings inside your I-Tech amplifi er for easy recall by
saving them as a preset.
To store a preset:
• Open the Component Control Panel of the amplifi er in IQwic.
• Expand the Control Panel to gain access to the Presets tab, as shown in Figure 3.7.
• Make sure that the current state of the component is one that you wish to save.
• Type any desired text into the Description, Channel 1, or Channel 2 fi elds. The
preset name and channel names will appear on the LCD screen when the speaker
preset menu is displayed*
• Click on the "Store" button at the top of the page. This readies the situation so that
the next button pressed will be the one through which this particular set of control
settings will be recalled.
• Click on any of the buttons, 1 - 10 to store the preset. Clicking on a button that
already contains preset data will immediately overwrite the existing preset.
* See the Help fi les in IQwic software for more about storing and recalling presets.

3.4.2 Recall a Preset

Presets can be recalled from the front panel worksurface of the amplifi er as well as
from IQwic software.
To recall a preset via the front panel worksurface:
Refer to Figure 3.8 for locations of front panel controls.
• Press the Menu/Exit button
• Press either the Prev. or Next button to scroll forward or backward through the
basic menu options until fi nding the Speaker Preset option.
• Rotate either Encoder knob to choose any of ten available presets. As you scroll
through the presets note that the preset number for each of the nine "non-active"
presets will fl ash to indicate that they have not been selected. Figure 3.6 shows an
example preset.
• Push in the Encoder knob to select the preset. You will be prompted to press again
to confi rm your selection. Once active, the preset will stop fl ashing.
• Press the Menu/Exit button to exit the menu and return the display to the default
Attenuation screen.
Application Guide
Section 3: I-Tech Settings
Figure 3.7
Preset Tab of the I-Tech
Control Panel in IQwic
Software