Table of Contents
Advertisement
The four parts of the programmable MIDI code are: Channel, Msb, Lsb en Voice.
1.
Press the MENU piston
Use the - and + pistons to select the MIDI Config
2.
function on the display.
3.
Press the SET function. A question to select a MIDI stop
to configure appears on the display.
4.
Activate the MIDI stop which has to be configured
(MIDI from the Swell, for example). The display shows
on the first line: Swell Channel (the selected MIDI
stop and the first part of the MIDI code) and on the
second line the settings of all four parts: Channel, Msb,
Lsb en Voice.
5.
Use the - and + pistons to select the desired MIDI-
channel.
Press the SET piston. The display shows: Swell Msb.
6.
7.
If needed, use the - and + pistons to select the desired
Msb setting.
Press the SET piston. The display shows: Swell Lsb.
8.
9.
If needed, use the - and + pistons to select the desired
Lsb setting.
10. Press the SET piston. The display shows: Swell
Voice.
11. Use the - and + pistons to select the desired Voice
setting.
12. Press the SET piston. The selected configuration is now
stored in memory. The first of the four parts of the
programmable MIDI code appears on the display.
13. Press the MENU piston 2x to exit the Johannus Menu.
5.10 Orchestrals
Solo- and orchestral voices are standard playable from a factory defined manual. This can be
changed via the Johannus Menu. Also an alternative voice can be chosen.
User Manual Vivaldi 270/370
Johannus Menu:
Ambiance
Johannus Menu:
MIDI Config
Select a MIDI
Stop to config
Swell Channel
2
0
0
Swell Channel
2
0
0
Swell Msb
2
0
0
Swell Msb
2
0
0
Swell Lsb
2
0
0
Swell Lsb
2
0
0
Swell Voice
2
0
0
Swell Voice
2
0
0
Swell Channel
2
0
0
Am:Center Mem: 1
Tr: 0/440
Cr: 0
1
1
1
1
1
1
1
1
1
28
Advertisement
Table of Contents
