Table of Contents
Advertisement
The default registrations of the 20 steps can be changed. See § 5.2 Crescendo.
Activating the crescendo pedal
If the crescendo pedal is not activated it is
indicated on the displays with Cr:--.
Use the CR piston to activate the crescendo
pedal. The display indicates the actual step.
Crescendo pedal as swell pedal
The crescendo pedal can also be configured as a swell pedal. See § 4.2 Expression
pedals.
If the crescendo pedal is set as swell pedal, all functions of the original crescendo
pedal are deactivated.
4.12 Quick Access
Quick Access is a function to quickly access certain function of the organ.
4.12.1 Programming mode crescendo pedal
Pressing the SET and CR piston simultaneously enters the programming mode of
the crescendo pedal. See § 5.2 Crescendo, sub a6 for next steps.
4.12.2 Programming solo- and orchestral voices
Through use of Quick Access it is possible to assign a solo- or orchestral voice
directly to a manual or the pedal or select an alternative voice.
1.
Press the SET piston simultaneously with a piston of a solo- or orchestral
voice, for example Panflute.
2.
The actual assignment appears on the
display.
3.
Use the - and + pistons to select an alternative voice or go directly to step 4.
4.
Press a key of the manual or the pedal on which the solo- or orchestral voice
has to be assigned.
5.
Now the solo- or orchestral voice is playable from the selected manual or
pedal.
See Chapter 6 VOICE PACKAGES for more information about solo- and orchestral
voices.
User Manual Vivaldi 270/370
This function is not available when the crescendo pedal is set as
swell pedal.
Am:Center Mem: 1
Tr: 0/440
Cr:--
Am:Center Mem: 1
Tr: 0/440
Cr: 0
Panflute (def.)
Assigned: Great
18
Advertisement
Table of Contents
