Part 6: Maintenance And Cleaning; Water Inlet Fi Lters - Philco PWM 15 PL User Manual

PART 6: MAINTENANCE AND CLEANING

• Disconnect the washing machine from the power socket.
• Shut off the water inlet.
CAUTION!
The washing machine and its components could be damaged if you use agents containing solvents. Do
not use washing detergents or fabric softeners containing solvents.

Water inlet fi lters

There are fi lters connected to the hose ends at the tap end and at the end of the inlet valves, which prevent dirt
and foreign materials contained in water entering the washing machine. If the washing machine is not fi lling
up with a suffi cient amount of water despite the water inlet being open, clean these fi lters.
• Disconnect the supply hose.
• Using tweezers take the fi lters out of the inlet valves and clean them with a brush.
• Using your hand, take out the fi lters on the supply hoses at the end connected to the tap together with
the seals and clean them.
• After cleaning the fi lters, put them back in the same way.
WARNING:
The water inlet fi lters may become clogged as a result of a connection to poor quality water or insuffi cient
maintenance, etc. Dirty fi lters result in water leaks that may cause damage to the washing machine
and property. Damages caused by incorrect maintenance of the fi lters are not covered by the warranty
conditions.
EN - 16
Copyright © 2013, Fast ČR, a. s. 09/2013