Additional Functions - Philco PWM 15 PL User Manual

Selecting programs and functions
Select a program and additional functions appropriate for your laundry using the program selection dial.

Additional functions

Before starting a program, you can add additional functions to improve washing results.
Press the respective button of the additional function. The symbol of the additional function will start fl ashing
on the display. If the symbol of the additional function fl ashes only for an instant then the function is not
available.
NOTE:
Additional functions are not compatible with all the programs.
There is only a limited time period for the selection of an additional function.
The combination of individual additional functions is not available for all programs.
Half load detection system
The washing machine is equipped with a system that detects a half drum load. If you place half the maximum
laundry load or even less into the drum, the washing machine will automatically identify this fact and shorten
the washing cycle, thus lowering water and power consumption.
No spin
This function is suitable for washing delicate laundry. Press this button to activate this function and the
spinning process will commence.
Prewash
The prewash function can be added to the main wash, which is especially suitable for heavily soiled laundry.
When using this function, it is necessary to put washing powder into the prewash compartment.
Press the prewash button to activate this function.
NOTE:
The prewash function will extend the selected program by a certain amount of time. This time depends
on the type of selected program. Do not use liquid washing detergents in the prewash compartment.
Starting a program
Start the selected program by pressing the Start/Pause button.
If you press this button while a program is running then this program will be paused.
If the washing machine goes into the stand-by mode, the Start/Pause indicator light will fl ash shortly.
Cancelling a program
Cancelling a program that is currently running
Turn the program selection dial to the 0 position.
The washing machine will stop and the program will be cancelled.
To drain the water, turn the program selection dial to any position.
The water will be drained automatically.
Now you can select a new program.
Copyright © 2013, Fast ČR, a. s.
EN - 13
09/2013