Applying The Condensation Strip - Baumatic BDWS59SS User Manual

o DO NOT
INFORMATION ON IT IS IMPORTANT.
o The moulded plug that is supplied with the appliance must be
placed into an earthed and insulated socket.
o Broken or damaged power leads must only be replaced by a
suitably qualified person. A power lead of a similar type must be
used in replacement.
o Power lead type – H 0 V V – F 3G 1,5.
o IMPORTANT: We do not recommend that this appliance is
connected to an extension lead.

Applying the condensation strip

o The condensation strip will be located inside of your dishwasher.
o Ensure that the underneath of the worktop is clean before
sticking the strip to it.
o Separate the backing paper away from the strip.
o Stick the condensation strip to the underneath of the worktop.
o IMPORTANT: Failure to attach the condensation strip could
result in damage to your worktop.
36
o Consult the rating plate, located
on the right hand side of the drop
down door BEFORE making the
electrical connections. Ensure that
the voltage reaching the plug is
the same as that on the rating
plate.
REMOVE THE RATING PLATE
o The condensation
must be fitted
underside of the worktop to
protect it
ingress of moisture. The
strip will deflect steam that
rises from your appliance,
away from the underneath
of the worktop.
AS THE
strip
to the
against the