Remaining Recording Time/Battery Power - JVC GZ-HD520 User Manual

Recording
Caution :
The only manual recording setting available is "TELE MACRO".
0
The rest are all set to "AUTO".
Digital zoom, image stabilizer, self-timer, and continuous shooting are not
0
available after AUTO REC is set.
AUTO REC cannot be used together with TIME-LAPSE RECORDING.
0
When both are set, priority is given to TIME-LAPSE RECORDING.
The auto power off and power-saving modes are not available after AUTO
0
REC is set.
Memo :
Recording stops when there are no changes for 5 seconds during video
0
recording.
Recording may not start when the movements of the subject within the red
0
frame are too fast or the changes in brightness are too small.
Recording may not start when the change in brightness is too small.
0
Recording may start due to changes in brightness even if there is no
0
movement of the subject within the red frame.
The performance of AUTO REC is affected by its sensitivity to the
0
surrounding brightness. The function may not work with certain
environments.
While zooming, recording cannot be started.
0
34

Remaining Recording Time/Battery Power

You can check the remaining video recording time on the HDD and microSD
card as well as the remaining battery power.
1 Select video or still image mode.
The video or still image mode icon appears.
0
2
Press M.
Press once to display the remaining recording time. Go to step 3.
0
Press twice to display the remaining battery power. Go to step 4.
0
Display the remaining recording time.
3
The remaining recording time is displayed only in the video recording
0
mode.
If you select the still image mode, go directly to step 4.
To change the video quality, select video quality with the slider and
0
touch C.
To display the remaining battery power, touch the ";" button.
0
To exit the display, touch the D button.
0
4 Display the remaining battery power.
To exit the display, press the INFO button M or touch the D button.
0
Memo :
The remaining battery power will not be displayed when the AC adapter
0
is connected.