Remaining Recording Time/Battery Power - JVC Everio GZ-E110 Detailed User Manual

Digital zoom and image stabilizer are not available after "AUTO REC" is
0
set.
"AUTO REC" cannot be used together with "TIME-LAPSE RECORDING".
0
When both are set, priority is given to "TIME-LAPSE RECORDING".
The auto power off and power-saving modes are not available after "AUTO
0
REC" is set.
Memo :
Settings of "AUTO REC" are not saved when the power is turned off.
0
Recording may not start when the movements of the subject within the red
0
frame are too fast or the changes in brightness are too small.
Recording may start due to changes in brightness even if there is no
0
movement within the red frame.
While zooming, recording cannot be started.
0

Remaining Recording Time/Battery Power

You can check the remaining recording time on the SD card as well as the
remaining battery power.
Memo :
To select/move cursor towards up/left or down/right, press the button UP/<
or DOWN/>.
1
Press OK/INFO.
2
Display the remaining recording time.
To display the remaining battery power, press OK/INFO again.
0
To exit the display, press MENU.
0
3
Display the remaining battery power.
To exit the display, press OK/INFO.
0
Press MENU to return to the remaining recording time display.
0
Remaining battery power will not be displayed when the AC adapter
0
is connected.
Memo :
You can change the video quality from the remaining recording time
0
display.
Select the video quality with the UP/< and DOWN/> buttons and press
OK.
Recording
27