Load Setup Defaults; Integrated Peripherals - EPOX EP-68LXR Manual

EP-68LXR

4-6 Load Setup Defaults

The "LOAD SETUP DEFAULTS" function loads the system default data directly
from ROM and initializes the associated hardware properly. This function will be
necessary only when the system CMOS data is corrupted.

4-7 Integrated Peripherals

Note: If you do not use the Onboard IDE connector, then you will need to
set Onboard Primary PCI IDE: Disabled and Onboard Secondary PCI
IDE: Disabled
Note: The Onboard PCI IDE cable should be equal to or less than 18
inches (45 cm.).
Figure 8: Integrated Peripherals
BIOS
Page 4-19