Installation - Miele KM 3054 Operating And Installation Instructions

Installation

^ Create the countertop cutout as per
the dimension drawing. Remember to
maintain a minimum safety distance
from the back wall, as well as from
any tall unit or side wall to the right
or left of the cooktop (see
"IMPORTANT INSTALLATION
SAFETY INSTRUCTIONS").
^ Seal the cut surfaces with a suitable
heat-resistant sealant to avoid
swelling caused by moisture.
The materials used must be
heat-resistant.
Make sure that these materials do
not touch the surface of the
countertop.
^ Feed the appliance power cord
downwards through the countertop
cutout.
^ Place the appliance loosely in the
cutout.
If during installation the seal around
the frame does not sit flush with the
countertop in the corners, the corner
radius, maximum
carefully filed down to fit.
^ Connect the appliance to the
electrical supply (see "Electrical
connection").
^ Connect the gas (see "Gas
connection").
38
3
/ " (4 mm), can be
16
^ Secure the appliance in place with
the supplied brackets a.
After installation
After installing the appliance, check the
cooktop function by turning on all
burners.
In the "low setting", the gas flame must
not go out, even if the burner knob is
quickly turned from the "high setting" to
the "low setting".
In the "high setting", the gas flame must
burn with a clearly visible center.