Quick Turn-Off; Operating/Residual Heat Indicator - Miele KM 3054 Operating And Installation Instructions

Quick turn-off

Operating/Residual heat indicator

All active burners are turned off by pressing the quick turn-off
f touch key.
^ Touch the f touch key.
The operating/residual heat indicator of the active burners
flashes.
Any set short time continues to run down if it is not assigned
to a burner.
If the short time is assigned to a burner, it is canceled.
The quick switch-off pilot light stays lit until all active burner
knobs are turned to "ß".
The operating/residual heat indicator lights up as soon as the
burner is turned on and stays lit during use. If the appliance
is turned off, the indicator goes out briefly and then lights up
again if residual heat is still present.
While the residual heat indicator is lit, do not touch the gas
cooktop or place any heat sensitive objects on it. Risk of
burns and fire!
Flashing of the display indicates an error message. See
"Frequently asked questions".
Operation
19