Frequently Asked Questions - Miele KM 3054 Operating And Installation Instructions

Frequently asked questions

,
Repairs should only be carried out by an authorized technician in
accordance with local and national safety regulations. Unauthorized repairs
could cause injury or appliance damage.
Problem
The burner does not
ignite when used for
the first time or after
not being used for a
longer period.
The burner does not
ignite after several
attempts
Power failure during
use
Flame goes out after
ignition
The shape of the gas
flame varies
Flame goes out
during use
The
operating/residual
heat indicator of a
burner flashes
30
Cause
There may be air in the gas line.
The burner is not assembled
correctly.
The gas valve is closed.
The burner is wet and/or dirty.
The igniters are wet.
- Residue has been built up
between the ignitor and the burner.
- The burners are assembled
incorrectly.
The burner parts are not positioned
correctly.
The burner head or burner cover
holes are dirty.
The burner parts are not positioned
correctly.
Power failure
Power failure
Solution
Repeat the ignition process several
times if necessary.
Turn all burner control knobs to "ß" and
disconnect the power to the appliance
for few seconds
Assemble the burner correctly.
Open the gas valve.
Clean and dry the burner.
Dry the igniters.
Turn all burner control knobs to the
clockwise to "ß". When the power is
restored, you can use the appliance as
normal.
Clean the burners
Position the burner parts correctly.
Position the burner parts correctly.
Remove the dirt.
Position the burner parts correctly.
Turn all burner control knobs to the
clockwise to "ß". When the power is
restored, the appliance can be used as
usual.
Turn all burner control knobs to the
clockwise to "ß". When the power is
restored, the appliance can be used as
usual.