Brickcom OSD-040 36x Series User Manual page 68

8.6.2 Date and Time
a. Manual – Manually enter the date and time.
b. Clone from PC – The camera will sync with the time, date and time
zone of the computer used to modify the camera settings. Check
"Clone" to utilize this option. The read-only date and time of the PC
will be displayed.
c. NTP (Network Time Protocol) - NTP is a protocol for synchronizing
the clocks of a computer system. Select to update the time with a
NTP server on an hourly, daily, weekly, or monthly basis.
i. Time Zone – Select the local time zone from drop-down menu.
ii. NTP Server 1 and Server 2 - Enter the address of the NTP server
iii. Daylight Saving - Enable this option to automatically update for
Daylight Savings Time.
Click Apply to apply settings or Cancel to cancel changes.
64