IKEA KURVOR VRIDEN User Manual page 13

ENGLISH
5. Press
to save the new core tempera-
ture setting, or wait 10 seconds for it to
be saved automatically. The new de-
fault core temperature is displayed dur-
ing the next use of the core tempera-
ture sensor.
6. Make sure that the core temperature
sensor stays in the meat and in the
socket during the cooking.
7. When the meat is at the set core tem-
perature, the symbol for the core tem-
perature sensor
temperature flash. An acoustic signal
sounds for two minutes. The appliance
deactivates automatically. Press a but-
ton to stop the signal.
8. Remove the plug of the core tempera-
ture sensor from the socket . Remove
the meat from the appliance.
The Duration and End do not operate
with the core temperature sensor.
You can change the core temperature at
any time during the cooking:
1. Press
:
– Four times - the display shows the set
core temperature which changes ev-
ery 10 seconds to the current core
temperature.
– Five times - the display shows the
current oven temperature which
changes every 10 seconds to the set
oven temperature.
– Six times - the display shows the set
oven temperature.
2. Use the knob for the temperature to
change the temperature.
Turnspit
3
2
1
and the default core
4
Handle
1
Spit
2
Forks
3
Turnspit frame
4
Warning! The forks and the spit of the
turnspit are sharp. Be careful when you
operate it.
1. Put the deep roasting pan in the first
shelf position from the bottom.
2. Put the turnspit frame on the second
shelf position from the bottom.
3. Put the first fork into the spit.
4. Put the meat to be grilled on the turn-
spit.
5. Install the second fork.
Use the screws to tighten the forks.
6. Put the tip of the spit into the turnspit
hole (refer to "Product description").
7. Put the front part of the spit on the spit
frame.
8. Remove the handle.
9. Set the oven function and temperature
(refer to the cooking tables).
Telescopic runners
Installing the telescopic runners
You can put the telescopic runners on each
level.
13