Note - Toshiba RB-RWS21-E Installation Manual

Basic wiring diagram

NOTE

Terminals of A and B have no polarity.
To diverge from the indoor unit
Remote controller Remote controller
(Header)
A B
Terminal block
for the remote
control wiring
Earth
 Note
• It takes some time before the remote controller becomes operable when the power is turned on. This is not a
malfunction.
<When the power is turned on the remote controller>
It takes about 1 minute before the remote controller becomes operable.
Power on
• For the operation of switching the room temperature sensor and the settings of the test operation, refer to the
page 20.
(Follower)
(Sold
separately)
A B
Remote control wiring
(Locally procured)
2 2
0.5 mm to 2.0 mm .
A B
Indoor unit
About 1
minute
" " flashes
To diverge from the Header remote controller
Remote controller
(Header)
A B
Terminal block
for the remote
control wiring
Earth
" "
disappears
– 8 –
Installation Manual
Remote controller
(Follower)
(Sold
separately)
A B
Remote control wiring
A B (Locally procured)
2
0.5 mm to 2.0 mm
Indoor unit
Remote controller becomes
operable.
2
.
EN