Microphone Cord Termination; Ta5F Connector Assembly; Mic Cord Stripping Instructions - Lectrosonics UM450 Instruction Manual

Microphone Cable Termination
for Non-Lectrosonics Microphones

TA5F Connector Assembly

Mic Cord Stripping Instructions

Crimping to Shield and Insulation
Shield
Rio Rancho, NM
Crimp these Crimp these
fingers to fingers to
contact the clamp the
insulation
shield
Frequency Synthesized UHF Belt-Pack Transmitter
Strip and position the cable so that the clamp
can be crimped to contact both the mic cable
shield and the insulation. The shield contact
reduces noise with some microphones and the
insulation clamp increases ruggedness.
Insulation
NOTE: This termination is intended for UHF
transmitters only. VHF transmitters with 5-pin
jacks require a different termination. Lectrosonics
lavaliere microphones are terminated for
compatibility with VHF and UHF transmitters,
which is different than what is shown here.
11