Kyocera Copystar CS-2035 Service Manual page 67

Maintenance
item No.
Checking the developing count
U158
Description
Displays the developing count.
Purpose
To check the developing count.
Method
1. Press the start key.
2. Select the item using the exposure adjustment keys.
Exposure indicator
Exp. 1
Exp. 2
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
Setting the fuser control temperature
U161
Description
Changes the fuser control temperature.
Purpose
Normally no change is necessary. However, can be used to prevent curling or creasing of paper, or solve a
fuser problem on thick paper.
Method
Press the start key.
Setting
1. Select the item to be set using the exposure adjustment keys.
2. Change the setting using the zoom +/- keys.
Exposure
indicator
Exp. 1 (lit)
Exp. 2 (lit)
Exp. 3 (lit)
Exp. 4 (lit)
Exp. 5 (lit)
Exp. 1 (flashing)
Copying operation temperature 1: Temperature in copying operation at the start of copying
Copying operation temperature 2: Temperature in copying operation after the specified number of
sheets for fuser control have passed
Number of sheets for fuser control: The number of sheets to be counted for switching from copying oper-
ation temperature 1 to copying operation temperature 2
The temperatures are to be set such that Secondary stabilization >
3. Press the start key. The value is set.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
Description
Copy quantity display
First 3 digits of the developing count
Last 3 digits of the developing count
Description
Primary stabilization fuser temperature
Secondary stabilization fuser temperature
Copying operation temperature 1
Copying operation temperature 2
Number of sheets for fuser control
Number of sheets for fuser control (thick paper)
Setting range
°
120 to 185 ( C)
°
120 to 185 ( C)
°
160 to 220 ( C)
°
160 to 220 ( C)
1 to 99
1 to 99
Primary stabilization.
=
2HA/2HB
Initial
setting
140
160
170
180
5
20
1-3-35