Kyocera Copystar CS-2035 Service Manual page 54

2HA/2HB
Maintenance
item No.
Adjusting the DP scanning timing
U071
Description
Adjusts the DP original scanning timing.
Purpose
Make the adjustment if there is a regular error between the leading or trailing edges of the original and the
copy image when the optional DP is used.
Caution
Before making this adjustment, ensure that the following adjustments have been made in maintenance mode
U034
(P.1-3-12)
Method
Press the start key.
Adjustment
1. Select the item using the exposure adjustment keys.
Exposure
indicator
Exp. 1
Exp. 2
Exp. 3
Exp. 4
2. Press the interrupt key.
3. Place an original on the DP and press the start key to make a test copy.
4. Change the setting value using the zoom +/- keys.
For copy example 1, decrease the value of exp.1.
For copy example 2, increase the value of exp.1.
5. Press the start key. The value is set.
Completion
Press the stop/clear key while a selection item is displayed. The indication for selecting a maintenance item
No. appears.
1-3-22
U066
U071
(P.1-3-19)
Description
DP leading edge registration
(First side)
DP trailing edge registration
(First side)
DP leading edge registration
(Second side)
DP trailing edge registration
(Second side)
Original
Description
Setting
range
-32 to 32
-42 to 32
-32 to 32
-42 to 32
Copy Copy
example 1 example 2
Figure 1-3-11
Initial Change in
setting value per step
0 0.254 mm
0 0.254 mm
0 0.254 mm
0 0.254 mm