Brother DCP-J925DW Quick Setup Manual page 24

For Wireless Network Users
Configuration using the
11
CD-ROM installer and a
USB cable (Windows
only)
You need to temporarily use a USB cable
during configuration (cable not included).
a
Put the supplied installer CD-ROM into your
CD-ROM drive. If the model name screen
appears, choose your machine. If the language
screen appears, choose your language.
Note
If the Brother screen does not appear
automatically, go to My Computer (Computer),
double-click the CD-ROM icon, and then
double-click start.exe.
b
The CD-ROM Top Menu will appear. Click
Install MFL-Pro Suite and click Yes if you
accept the license agreements. Follow the
on-screen instructions.
Note
For Windows Vista
User Account Control screen appears, click
Allow or Yes.
24
®
® ®
and Windows 7, when the
c
Choose Wireless Network Connection, and
then click Next.
d
When this screen appears, choose Change
the Firewall port settings to enable network
connection and continue with the
installation. (Recommended) and click Next.
If you are using a firewall other than the
®
Windows Firewall or the Windows
off, this screen may appear.
See the instructions provided with your firewall
software for information on how to add the
following network ports.
For network scanning, add UDP port 54925.

 If you still have trouble with your network
connection, add UDP port 137 and 161.
e
Choose Use your computer or the control
panel directly. and then click Next.
®
Firewall is