Brother DCP-J925DW Quick Setup Manual page 22

Hide thumbs Also See for DCP-J925DW:
Table of Contents

Advertisement

For Wireless Network Users
10
Choose your wireless install method
The following instructions will offer three methods for installing your Brother machine in a wireless network
environment.
a
Configuration using the CD-ROM installer and a USB cable (Windows
• You need to temporarily use a USB cable during configuration (cable not included).
It is recommended that you use a PC wirelessly connected to your network for this method.
• If you are using Windows
point/router by network cable, you need to know your wireless settings. Please write down
your wireless network settings in the area below.
• Please do not contact Brother Customer Service for assistance without the wireless security
information. We cannot assist you in locating your network security settings.
Item
SSID (Network Name)
Network Key
* The Network Key may also be described as the Password, Security Key or Encryption Key.
Note
If you do not know this information (SSID and Network Key), you cannot continue the wireless
setup.
How can I find this information?
1) You should see the documentation provided with your wireless access point/router.
2) The initial network name could be the manufacturer's name or the model name.
3) If you do not know the security information, please consult the router manufacturer, your system
administrator, or internet provider.
Now go to
22
®
XP, or currently using a computer connected to an access
Record the current wireless network settings
®
only)
page 24

Advertisement

Table of Contents
loading

Table of Contents