Brother DCP-J925DW Quick Setup Manual page 19

Wired Network
d
Using both hands, grasp the plastic tabs on
both sides of the machine and gently close the
scanner cover.
11
Install MFL-Pro Suite
a
Put the supplied installer CD-ROM into your
CD-ROM drive.
b
Double-click the Start Here OSX icon to install.
c
Choose Wired Network Connection
(Ethernet), and then click Next. Follow the
on-screen instructions.
d
Please wait for the software to install. After the
installation, the Brother software will search for
the Brother device. This will take a few
moments to complete.
e
If the machine is configured for your network,
choose the machine from the list, and then click
OK.
Note
• If your machine is not found over the network,
confirm your network settings.
• You can find your machine's MAC Address
(Ethernet Address) and IP Address by printing
out the Network Configuration Report.
uuNetwork User's Guide: Printing the Network
Configuration Report
• If this screen appears click OK.
Enter a name for your Macintosh in
Display Name up to 15 characters long.
If you want to use the scan feature directly from
your machine to scan over the network, you
must check the Register your computer with
the "Scan To" function on the machine box.
Click OK. Go to f.
The name you enter will appear on the
machine's LCD when you press the Scan
button and choose a scan option. (uuSoftware
User's Guide: Network Scanning)
Macintosh
19