Brother DCP-J925DW Quick Setup Manual page 2

a
Remove the protective tape and film covering
the machine, and also from the LCD.
b
Remove the orange protective part a by lifting
the front of the machine and then pulling down
on the packing part.
c
Remove the plastic bag b containing the ink
cartridges from on top of the paper tray.
d
Make sure you have all the components.
e
Open the scanner cover, insert the Disc Tray
into the storage space on the right side of the
scanner cover, and then close the scanner
cover.
Note
When using the Disc Print feature make sure that
there is over 10 cm of free space behind the
machine.
2
1
2
2
Load plain A4 paper
a
Pull the paper tray a completely out of the
machine.
b
Open the output paper tray cover a.
1
1