Table of Contents
Advertisement
Configuration Menu
Function
Auto Iris
Off, Normal, High Speed
Reset
Yes, No
*
This is not displayed when a computer image signal is being input.
Signal menu
No sub menu items are displayed for the signal menu for USB signal input.
Function
*1
3D Setup
3D Display
3D Format
3D Depth
Diagonal Screen
Size
3D Brightness
Inverse 3D Glasses
3D Viewing Notice
*2
Aspect
Auto, Normal, Full, Zoom
*2 *3
Tracking
Varies depending on the input signal.
*2 *3
Sync.
0 - 31
*2 *4
Position
*3
Auto Setup
On, Off
Menu/Settings
Menu/Settings
On, Off
Auto, Side by Side,
Top and Bottom, 2D
-10 - 10
60 - 300
Low, Medium, High Sets the brightness for the 3D image.
Yes, No
On, Off
47
Explanation
You can change the luminance adjust‐
ment tracking for changes in brightness in
the displayed image. Set to Off for no lu‐
minance adjustment.
You can reset all adjustment values for
Image to their default settings.
Explanation
Enables or disables the 3D Display function.
p.35
s
Sets the 3D format for the input signal. If set to
Auto, the format is recognized automatically.
Sets the depth for the 3D image.
Sets the projection size for the 3D image. By
matching this to the actual size, you can achieve
the optimum 3D effect.
Reverses the synchronization timing for the left/
right shutters on the 3D Glasses and the left/right
images. Enable this function if the 3D effect is not
displayed correctly.
Turns the notice that appears when viewing 3D
content on or off.
Selects the aspect mode.
Adjusts computer images when vertical stripes
appear in the images.
Adjusts computer images when flickering, fuzzi‐
ness, or interference appear in the images.
•
Adjusting the Brightness, Contrast, or Sharp‐
ness may cause flickering or blurriness.
•
Adjusting the synchronization after adjusting
tracking allows for more accurate adjustments.
Adjusts the display position up, down, left, and
right when a part of the image is missing so that
the whole image is projected.
Sets whether or not to automatically adjust the
image whenever the input signal is changed.
When enabled, the tracking, display position,
and synchronization are automatically config‐
ured.
p.34
s
p.30
s
Advertisement
Table of Contents
