Epson EH-TW5100 User Manual page 55

Home projector
Table of Contents

Advertisement

Configuration Menu
Function
Channel
SSID
Search Access Point
IP Settings
(This can only be set
when Connection
Mode is set to Ad‐
vanced.)
SSID Display
IP Address Display
Security menu
Function
Security
Passphrase
Reset menu
Function
Reset network settings.
Menu/Settings
1ch, 6ch, 11ch
-
-
DHCP
IP Address
Subnet Mask
Gateway Address
On, Off
On, Off
Menu/Settings
No, WPA2-PSK, WPA/
WPA2-PSK
-
You can reset all adjustment values for Network to their default settings.
Explanation
(This can only be set when Connection Mode is set to Quick.)
Select the frequency bandwidth used by the wireless LAN.
(This can only be set when Connection Mode is set to Ad‐
vanced.)
Enter an SSID. When an SSID is provided for the wireless LAN
system in which the projector participates, enter the SSID.
You can enter up to 32 single-byte alphanumeric characters.
(This can only be set when Connection Mode is set to Ad‐
vanced.)
indicates currently connected access points.
the access points where security is set.
If you select an access point which has security, Security menu
appears.
p.54
s
Sets whether or not to use DHCP (On or Off). If this is set to
On, you cannot set any more addresses.
Inputs the IP address for the projector.
The following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Inputs the subnet mask for the projector.
The following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Inputs the gateway IP address of the projector.
The following gateway addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Sets whether or not to display the SSID on the LAN Standby
screen (On or Off).
Sets whether or not to display the IP address on the LAN
Standby screen (On or Off).
Explanation
Sets the security.
Select WPA2-PSK in Quick and WPA/WPA2-PSK in Ad‐
vanced.
Inputs the passphrase.
A case-sensitive passphrase of at least 8 characters but not
exceeding 32 characters can be set.
It is recommended to change the passphrase periodically for
the purpose of security.
Explanation
54
indicates

Advertisement

Table of Contents
loading

Table of Contents