Table of Contents
Advertisement
INSTALLATION OF NATURAL GAS REGULATOR
1. The Natural Gas regulator has been factory installed. Attach the PVC gas hose to the
regulator (see drawing below).
2. Adjust the brass elbow so that it is pointing down.
3. Connect the other end of the PVC gas hose to the house gas line using the quick-connect
fitting.
4. Do not use the grill until all connections have been checked and do not leak.
Fig. 1
Make sure the NG regulator is
located under island hole as shown
in Fig. 1.
Fig. 2
Use the 4 screws and bracket provided
to attach the NG regulator to the island
as shown in Fig. 2.
Fig. 3
Insert the 12ft. gas hose through the
back of the island and connect to the
NG regulator.
13
Advertisement
Table of Contents
