To Match Light The Grill - Jenn-Air 730-0336 Manual

TO MATCH LIGHT THE GRILL

If the burner will not light after several attempts using the control knobs, the burner may be lit with a
match.
1. If you have already attempted to light the burner with the igniter, allow 5 minutes for any
accumulated gas to dissipate.
2. Insert a match into the lighting rod. Ignite the match and insert through the cooking grids to the
burner.
3. Press and turn the control knob to the "IGNITE/HI" setting. Continue pressing the knob until the
burner ignites. The burner should light immediately.
4. If the burner does not light within 4 seconds, turn the knob to the "OFF" position, wait 5 minutes
for gas to dissipate and try again.
WARNING
When lighting, keep your face and hands as
far away from the grill as possible.
CAUTION
When using a match to light the grill make
sure to use the attached lighting rod.
14
Lighting Rod