LIGHTING ILLUSTRATIONS
MAIN BURNER LIGHTING
1.
Open the top cover or lid
2. Turn the main burner control knobs to the
"IGNITE / HI" setting. Push the control
knob in until the burner ignites; you should
hear a "clicking" sound if the electronic
ignition system is working properly. The
burner should ignite within 4 seconds (if
burner does not ignite follow match lighting
instructions on Page 14).
3. Once the burner ignites, adjust the
temperature level as desired.
.
ROTISSERIE BURNER & SEARING
SIDE BURNER LIGHTING
1. Push and turn rear burner knob slowly to
"IGNITE / ON" setting, hold in until th
burner is lit up, continue to press and
hold for 15 seconds and release. You
should hear a "clicking" sound if the
electronic ignition system is working
properly. The burner should ignite wi
4 seconds.
(if burner does not ignite follow m
lighting instructions on Page 14).
2. Push and turn searing side burner knob to
"IGNITE / HI" setting, hold in until the
burner ignites. The burner should ignite
within 4 seconds. After ignition, continue to
press and hold for 15 seconds and release.
(if burner does not ignite follow match
lighting instructions on Page 14).
13
e
thin
atch