Calling Features - D-Link DVG-5008S User Manual

Voip gateway
Hide thumbs Also See for DVG-5008S:
Table of Contents

Advertisement

Calling Features

Do Not Disturb: It will only be able to call out when it is enabled.
Unconditional Forward: All incoming calls will be forwarded to the "Forwarding Number"
automatically. If it forwards to FXO, it only make FXO hook off, not make FXO dial out.
Busy Forward: Forward the incoming call to "Forwarding Number" when the port is busy.
No Answer Forward: Forward the incoming call to "Forwarding Number" after ring timeout expires
without answer.
Call Hold: Enable the call hold feature on the specific FXS port.
NOTE: Call Hold must be checked; Call Transfer or Call Waiting is active.
Call Transfer: Enable the call transfer feature on the specific FXS port.
Call Waiting: Enable the call waiting feature on the specific FXS port.
Three-Way Calling / Service ID: Feature code of conference call defined on Nortel Soft Switch.
Calling Feature Instructions:
Call Hold: Ongoing call will be put on hold after FLASH button pressed on the phone set. The
gateway will play a repeating music to the remote end.
Call Transfer: Ongoing call will be put on hold after FLASH button pressed on local phone set
(gateway plays a repeating music to the remote end). Meanwhile, local user can dial out to
another number after dial tone observed. After the handset is back on the hook, the call on hold
will then be transferred to the new call regardless of the status of the new call. If wrong number is
dialed for the new call, just press the FLASH button to get back the call on hold. In another case,
if the local user doesn't hang up the phone after new call sets up, press FLASH button to switch
between the first call and the new call. Please be informed that PBX between phone sets and the
gateway must support FLASH features to make this function work correctly. If a phone set is
connecting directly to the FXS port of the gateway and not functioning to FLASH, please adjust
the settings in "Flash Detect Time" in category "Advanced Options".
Example of a Three-Way calling:
1.
Alex dials to Bob, Bob answers that call.
2.
Alex presses Flash and call to Coral (Bob is on hold), Coral answers that call.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents