washing machine


Table of Contents

Summary of Contents for Beko WMB61221W

  • Page 1 Automatic washing machine WMB61221W WMB61221S WMB61021W WMB61021S...
  • Page 2 Please read this user manual first! Dear Customer, We hope that you get the best results from the product which has been manufactured in state-of-the-art plants and passed through a strict quality control procedure. Therefore, please read the entire user manual carefully before using the product and keep it as a reference for future use.
  • Page 3: Table Of Contents

    TABLE OF CONTENTS 1 Your washing machine Additional programmes ... . 20 Special programmes ....20 Overview ......4 Temperature selection .
  • Page 4: Your Washing Machine

    Your washing machine Overview 1- Power cable 5- Adjustable feet 2- Top panel 6- Loading door 3- Control panel 7- Detergent drawer 4- Filter cap 8- Drain hose...
  • Page 5: Technical Specifications

    Technical specifications Models Maximum dry laundry capacity (kg) Height (cm) Width (cm) Depth (cm) Net weight (±4 kg.) 230 V / 50Hz Electrical input (V/Hz) Total current (A) 2200 Total power (W) 1200 1200 1000 1000 Spin speed (rpm max.) 1.35 1.35 1.35...
  • Page 6: Important Safety Instructions

    Important safety instructions • Never open the loading door or This section contains safety instructions remove the filter while there is still that will help protect from risk of personal water in the drum. Otherwise, risk of injury or property damage. Failure to flooding and injury from hot water will follow these instructions shall void any occur.
  • Page 7: Children's Safety

    Children's safety • Electrical products are dangerous for the children. Keep children away from the product when it is in use. Do not let them to tamper with the product. Use child lock to prevent children from intervening with the product. •...
  • Page 8: Installation

    Installation Refer to the nearest Authorised Service Removing packaging Agent for installation of the product. To reinforcement make the product ready for use, review Tilt the machine backwards to remove the information in the user manual and the packaging reinforcement. Remove the make sure that the electricity, tap water packaging reinforcement by pulling the supply and water drainage systems are...
  • Page 9: Connecting Water Supply

    will get damaged or the product will switch to protection mode and will not operate. Do not use old or used water inlet hoses on the new product. It may cause stains on your laundry. 1. Connect the special hoses supplied with the product to the water inlets 3.
  • Page 10: Connecting To The Drain

    Connecting to the drain an appropriate clamp as not to come off and leak. • The end of the drain hose must be Adjusting the feet directly connected to the wastewater drain or to the washbasin. In order to ensure that the product Your house will be flooded if the operates more silent and vibration- hose comes out of its housing...
  • Page 11 for any damages that will arise when the fuse cover has been fitted. Colour of the product is used without grounding in replacement fuse cover must be the same accordance with the local regulations. colour as that visible on the pin face of the plug.
  • Page 12: First Use

    First use 2. Remove water drain and water supply connections. Before starting to use the product, make 3. Drain the remaining water in the sure that all preparations are made in product completely; see, "Draining accordance with the instructions in remaining water and cleaning the sections "Important safety instructions"...
  • Page 13: Preparation

    Preparation Things to be done for energy saving Following information will help you use the product in an ecological and energy- Wash with sensitive, Washing water efficient manner. .short programmes temperature • Operate the product in the highest capacity allowed by the programme you have selected, but do not overload;...
  • Page 14: Correct Load Capacity

    Correct load capacity The maximum load capacity depends on the type of laundry, the degree of soiling and the washing programme desired. The machine automatically adjusts the amount of water according to the weight of the loaded laundry. Follow the information in the “Programme and consumption table”.
  • Page 15: Using Detergent And Softener

    Using detergent and softener • Wash your delicate clothes only with special detergents (liquid detergent, Detergent Drawer wool shampoo, etc.) used solely for The detergent drawer is composed of delicate clothes. three compartments: • When washing dark coloured clothes - (I) for prewash and quilts, it is recommended to use - (II) for main wash liquid detergent.
  • Page 16 putting in the detergent cup. Tablet detergents may leave residues in the detergent compartment. If you encounter such a case, place the tablet detergent between the laundry, close to the lower part of the drum in future washings. Use the tablet or gel detergent without selecting the prewash function.
  • Page 17 • Oxygen based bleaches can be used together with detergents; however, if its thickness is not the same with the detergent, put the detergent first into the compartment nr. “II” in the detergent drawer and wait until the detergent flows while the machine is taking in water.
  • Page 18: Tips For Efficient Washing

    Tips for efficient washing Clothes Light colours and Delicates/ Colors Dark colors whites Woolens/Silks (Recommended (Recommended (Recommended (Recommended temperature temperature temperature range temperature range range based range based based on soiling based on soiling level: on soiling level: on soiling level: level: 40-90C) cold-40C) cold-40C)
  • Page 19: Operating The Product

    Operating the product Control panel 1 - Programme Selection knob (Uppermost position On/Off) 2 - Programme Follow-up indicator 3 - Temperature Adjustment button 4 - Spin Speed adjustment button 5 - Auxiliary Function buttons 6 - Delayed Start button (in some models) 7 - Start / Pause button Preparing the machine Normally soiled, coloured,...
  • Page 20: Main Programmes

    water temperature. duration may automatically be shortened during later stages of the programme if Always select the lowest required you wash less amount (e.g. ½ capacity temperature. Higher temperature or less) of laundry. In this case energy means higher power consumption. and water consumption will be further For further programme details, see decreased giving you the opportunity for...
  • Page 21: Temperature Selection

    laundry with the set spin speed and drain the water coming out of them. If you wish to drain only the water without spinning your laundry, select the Pump+Spin programme and then select the No Spin function with the help of Spin Speed Adjustment button.
  • Page 22: Programme And Consumption Table

    Programme and consumption table Auxiliary functions Selectable Programme temperature range °C Cottons 2.00 1600 • • • • • • Cold-90 Cottons 1.35 1600 • • • • • • Cold-90 Cottons 0.70 1600 • • • • • • Cold-90 Cottons Eco 60**...
  • Page 23 • Selectable Automatically selected, no cancelling. ** Energy Label programme (EN 60456 Ed.3) *** If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin speed. Water and power consumption may vary subject to the changes in water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, selection of auxiliary functions and spin speed, and changes in electric voltage.
  • Page 24: Auxiliary Function Selection

    Auxiliary function selection • Extra Rinse This function enables the machine to Use the following auxiliary functions make another rinsing in addition to the according to your daily needs. Select one already made after the main wash. the desired auxiliary functions before Thus, the risk for sensitive skins (babies, starting the programme.
  • Page 25: Starting The Programme

    Delayed Start (In some models only) turn on. With the Delayed Start function the If no programme is started or no key startup of the programme may be delayed is pressed within 1 minute during up to 3, 6 or 9 hours. programme selection process, the machine will switch to Pause mode Do not use liquid detergents when...
  • Page 26: Progress Of Programme

    Changing the selections after for 3 seconds. In addition to the method above, to programme has started deactivate the Child Lock, switch the Switching the machine to pause Programme Selection knob to On mode / Off position when no programme Press the Start / Pause button to switch is running, and select another the machine to pause mode while a...
  • Page 27 programme will start depending on the step the previous programme was canceled in. For example, it may take in additional water or continue to wash with the water inside. Depending on the step where the programme was canceled in, you may have to put detergent and softener again for the programme you have selected anew.
  • Page 28: Maintenance And Cleaning

    Maintenance and cleaning Service life of the product extends and (compartment nr. II). If the anti-limescale frequently faced problems decrease if is in tablet form, put only one tablet into cleaned at regular intervals. compartment nr. II. Dry the inside of the bellow with a clean piece of cloth after the Cleaning the detergent drawer programme has come to an end.
  • Page 29: Draining Remaining Water And Cleaning The Pump Filter

    cleaned as they do get dirty. Temperature of the water inside the machine may rise up to 90 ºC. To avoid burning risk, filter must be cleaned after the water in the machine cools down. 2. Open the filter cap. If the filter cap is composed of two pieces, press the tab on the filter cap downwards and pull the piece out...
  • Page 30 while installing it into its housing. Seat the filter into its place completely. Otherwise, water may leak from the filter cap. 6. If the filter cap is composed of two pieces, close the filter cap by pressing on the tab. If it is one piece, seat the tabs in the lower part into their places first, and then press the upper part to a.
  • Page 31: Troubleshooting

    Troubleshooting Programme cannot be started or selected. • Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> Press and hold Start / Pause / Cancel button for 3 seconds to reset the machine to factory settings. (See "Cancelling the programme") Water in the machine.
  • Page 32 Loading door cannot be opened. • Door lock is activated because of the water level in the machine. >>> Drain the water by running the Pump or Spin programme. • Machine is heating up the water or it is at the spinning cycle. >>> Wait until the programme completes.
  • Page 33 Machine does not switch to spinning step. • There might be an imbalance of laundry in the machine. >>> Automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum. Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment.
  • Page 34 Colour of the clothes faded. • Excessive laundry was loaded in. >>> Do not load the machine in excess. • Detergent in use is damp. >>> Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures. •...
  • Page 35 Detergent residue in the detergent drawer. • Detergent is put in wet drawer. >>> Dry the detergent drawer before putting in detergent. • Detergent has gotten damp. >>> Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures. •...
  • Page 36 Laundry remains wet at the end of the programme • Excessive foam might have occurred and automatic foam absorption system might have been activated due to too much detergent usage. >>> Use recommended amount of detergent. Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment.
  • Page 37: Guarantee

    Republic of Ireland. items. • The guarantee is applicable only to • The labour costs of a Beko approved new products and is not transferable if repairer to carry out the repair. the product is resold. • Beko disclaims any liability for What is not covered? incidental or consequential damages.
  • Page 38: Service

    Should you experience any difficulty in require attention under guarantee. obtaining service please contact the Beko Customer Help-Line. You should also complete the details Tel: 0845 600 4911 below;...

This manual is also suitable for:


Table of Contents