Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Crestron TPS-CBL
Summary of Contents for Crestron TPS-CBL
- Page 2 This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON...
-
Page 3: Table Of Contents
Crestron TPS-CBL-3/6/9 Contents Cable for TPS/Tilt Panel: TPS-CBL-3/6/9 Description Functional Description Physical Description Cable/Port Signals Cable Connections Further Inquiries Future Updates Return and Warranty Policies Merchandise Returns / Repair Service CRESTRON Limited Warranty Installation Guide - DOC. 6010 Cable for TPS/Tilt Panel... -
Page 5: Cable For Tps/Tilt Panel: Tps-Cbl-3/6/9
New users are required to register to obtain access to the FTP site. NOTE: Although designed specifically for TPS-4500 touchpanels, the TPS-CBL-3/6/9 cable may be used with any tilt touchpanel that requires a connection only to the NET/VIDEO port. Installation Guide - DOC. 6010 Cable for TPS/Tilt Panel Cable for TPS/Tilt Panel: TPS-CBL-3/6/9 •... -
Page 6: Physical Description
Cable for TPS/Tilt Panel Physical Description The TPS-CBL-3/6/9 cable contains two 10-pin plugs for NET/VIDEO connections. For the description of the cable, refer to the diagram below. Cable View NET/VIDEO PIN 1 * (TAB IS FACING AWAY) 2 • Cable for TPS/Tilt Panel: TPS-CBL-3/6/9... -
Page 7: Cable/Port Signals
Crestron TPS-CBL-3/6/9 Cable/Port Signals For the TPS-CBL-3/6/9 cable/port signals, refer to the table below. NET/VIDEO Plug Pin-Outs DESIGNATION Cable Connections NOTE: If connecting the video from the TPS-4500IMC Interface Module (or optional TPS-4500IMW) to the touchpanel, exceeding a cable length 30-feet will significantly degrade the signal. To maintain high- quality video, DO NOT daisy-chain cables, Crestron TPS-BLOCK devices or fabricate cables longer than 30-feet. - Page 8 Cable for TPS/Tilt Panel 1. Refer to the diagram below. At the rear of the touchpanel base, attach the TPS-CBL-3/6/9 cable plug labeled NET/VIDEO to the NET/VIDEO port. Attach Cable Plug to Touchpanel TPS-CBL-3/6/9 CABLE 2. Refer to the diagram below. At the TPS-4500IMC (or optional TPS-4500IMW, not shown), attach the cable plug labeled NET/VIDEO to the NET/VIDEO port.
-
Page 9: Further Inquiries
• In Australia and New Zealand, call Crestron Pacific at +613-9480-2999. You can also log onto the online help section of the Crestron website (www.crestron.com) to ask questions about Crestron products. First-time users will need to establish a user account to fully benefit from all available features. -
Page 10: Return And Warranty Policies
CRESTRON shall not be liable to honor warranty terms if the product has been used in any application other than that for which it was intended, or if it has been subjected to misuse, accidental damage, modification, or improper installation procedures. - Page 11 Crestron TPS-CBL-3/6/9 Cable for TPS/Tilt Panel This page intentionally left blank. Cable for TPS/Tilt Panel: TPS-CBL-3/6/9 • 7 Installation Guide - DOC. 6010...
- Page 12 Crestron Electronics, Inc. Installation Guide - DOC. 6010 15 Volvo Drive Rockleigh, NJ 07647 12.01 Tel: 888.CRESTRON Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.
Need help?
Do you have a question about the TPS-CBL and is the answer not in the manual?
Questions and answers