Side Control/Remote Control Operation
Side Control
INPUT button
* Only the Input button function is set Mode 1 in the Setting menu, the INPUT button is used for switching input source.
(p.51)
The input source changes each time you press the INPUT button on the side control or the remote control as follows:
Input 1→ Input 2→ Input 3 → ...
Before using the INPUT button on the side control or the remote control, you must select a correct input source by On-
Screen Menu and the latest input source will be displayed.
Remote Control Operation
Press the INPUT 1, INPUT 2, or INPUT 3 button on the remote control. The input source appears on the screen as you
press each button. Select the connected input source.
INPUT 1 button
Input 1
RGB (PC analog)
RGB (Scart)
HDMI
INPUT button
Input
Video
y,Pb/Cb,Pr/Cr
S-video
Input Selection
Direct Operation
*
INPUT button
INPUT 2 button
Input 2
Video
y,Pb/Cb,Pr/Cr
RGB
Remote Control
*
Remote Control
INPUT 1/2/ buttons