Table of Contents
Advertisement
PART 3 - STEP BY STEP INSTALLATION
STEP 1: Plan Your System Layout
This is the most important step. Be sure to take the time to plan
carefully. This will avoid time consuming corrections to your installation.
Before beginning installation of your system we recommend you make
an aerial sketch of your yard such as the one shown in Figure 6. Your
sketch should include all buildings, large plants, trees, walks, driveway,
pool and other important details. Then sketch in where you plan to place
the boundary wire. Make sure the wire makes a continuous loop.
SAFETY TIP:
Since you will only be burying the cable 4 inches deep at maximum,
it is unlikely that you will disturb power or phone lines. Still, we
recommend that you contact your utility companies to find out the
location of all buried wires, mark them on your sketch and avoid
running the boundary cable in these areas.
______________________________________________________________________________________
14
www.hightechpet.com
High Tech Pet Products, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the humane contain HC-8000 and is the answer not in the manual?
Questions and answers