Gigaset C590 ip Manual page 16

Assigning the send/receive connection
e.
Send Connections
INT1
sends calls with
Fixed Line:
4560123
Change
f.
Connection for
outgoing calls:
< IP1
Back
Instead of a fixed connection, you can also select Sel. at each call. Each time you make a call, you
can then select the connection you wish to use.
You can go on to initially start the connection wizard for each additional handset registered to the
base. The following is displayed in sequence for each handset:
Assign connections to handset xxx?
>
Carry out steps a.
16
Ð
OK
INT 1
>
Save
to f. (see above) for each registered handset.
The send connection currently set for the handset
is displayed: Fixed Line.
>
Press the display key
change the setting. Skip the following step.
>
To change the setting, press the display key
§Change§.
Which connection/phone number should the
handset use to make a call:
>
Press right on the control key
until the required connection is displayed (in
the example, IP1).
>
Press the display key
§OK§
if you do not wish to
v
repeatedly,
§Save§
to save the settings.